 |
||||
|
||||
|
RFQ's and sales request sales@noisecontrolproducts.com
Send Drawings and Photos engineering@noisecontrolproducts.com
Acoustical Baffles & Diffusers – Built of absorptive or active materials these items can be suspended from ceilings or attached to walls to absorb or reflect noise. They are commonly available for industrial, commercial, and or recording, web/broadcasting applications.
Interior and Theatrical Applications – Acoustical panels addressing problems in theatres, auditoriums, rehearsal studios, conference rooms, office areas, etc. are available in all forms, shapes and colors. Various panel types may be covered in fabric, plastic, steel, aluminum, or painted. Depending on where and how they are to be used will dictate the best surface material.
While panels absorb sound, diffusers are used to regulate sound to optimum levels with angled surfaces. Reflector panels can be used in ceiling systems to actually carry sounds properly into large performing areas.
Vinyl / Barrier, Foams & Composite Materials – Mass-loaded vinyl may be used for blocking sound from leaving or entering an area. Flat foams, as well as pyramidal foams, can be used in rooms or machinery requiring sound absorption. Because most noise problems require a combination of materials, we sell them in various composites. For instance, it is often required to have a layer of sound barrier material, adhered to a sound absorbing material. Instead of simply increasing the mass of a barrier to obtain greater sound barrier properties, a lighter construction can be achieved by separating the barrier from the wall or panel with a de-coupler or spacer, of light material, such as flexible foam. Composite materials may be used in machinery cabinets to reduce noise, around pipes for expansion and contraction noise (pipe duct lagging), etc.
(When choosing a barrier, some properties which should be taken into consideration are: thickness, density, stiffness, resistance to heat and chemicals, flammability, tear strength, abrasion resistance, thermal insulation, flexibility and cost.)
We offer a tremendous variety of composite materials. Some of these products are treated with heat resistant coatings to withstand up to 500 degrees!
Quality ArtUSA Noise Barriers
- significantly reduce the noise levels.
- guarantee acoustic performance.
- significantly reduce public complaint levels.
- provide an aesthetic visual barrier that will last.
Two Types of ArtUSA Noise Barriers
|
Absorptive Barriers:
|
Reflective Barriers:
|
|
|
|
ArtUSA ABA
Composite features a non-reinforced loaded vinyl
noise barrier septum (middle) with a quilted
fiberglass sound absorber on both sides.
Ideally suited as an acoustical liner, the inner layer of quilted
fiberglass decouples the barrier from the surface to improve its noise
blocking ability while the outer layer adds sound absorption to the
treated environment. ArtUSA AB composite features a reinforced loaded vinyl noise barrier with a quilted fiberglass sound absorber on one side. The rugged durable exterior barrier is commonly used as a wrap or acoustical jacket due to its ability to conform to any shape. The quilted fiberglass layer decouples the noise barrier to enhance its acoustical performance. Both styles are available in curtain panels, bound or unbound rolls, custom fabrications or die-cut pieces, in standard vinyl-coated-fiberglass-cloth facings, high-temp silicone facings or economy facings.
|
|
|
CUSTOM COMPOSITE QUIETS COMPRESSOR STATION |
|
|
Over 800 sound absorption/barrier panels in 50 different sizes line the interior of Tennessee Gas Pipeline's compressor station 254.
The composite, made up of quilted fiberglass and a 1 lb./sq.ft. barrier, would does double duty for Tennessee Gas by absorbing airborne sound waves and increasing the transmission loss ability of the building. Leaks at the seams of the panels are prevented by using a velcro attached noise barrier batten.
Post-installation testing showed the solution performed better than the promised results. The noise level at the property line was reduced from 60dB(A) to 45dB(A). 5dB(A) lower than what was specified. And while noise levels within the building were not as critical, Tennessee Gas officials were pleased the employees could now hold a conversation without shouting.
In
addition, Tennessee Gas found that the light colored fabric facing dramatically
improved the lighting inside the building.
We also offer pipe and duct wrap
The ArtUSA Lag Series combines a loaded vinyl noise barrier with a fibrous glass scrim reinforced aluminum foil facing on one side. IB-10aLAG is commonly used for wrapping noisy iron, steel, and plastic pipe, ducts, valves, and heat exchangers in a wide variety of indoor and outdoor applications. The entire series has excellent corrosion and outdoor weathering resistance, high strength and excellent conformability. The reinforced foil facing readily accepts a matching tape for quick and easy installation.
B-10aLAG is available in combination with a nominal one-inch thick (IB-10aLAG/IQFA-3) or two-inch thick (IB-10aLAG/IQFA-9) quilted fiberglass decoupler to form a tight fitting "floating" noise barrier. The quilt decouples the loaded vinyl barrier from the noise emitting surface achieving greater noise reductions. The one-step installation of decoupler, barrier, and outer jacket offers substantially lower installation costs. The composite combination is also designed to provide thermal insulation to reduce energy consumption.
Catalogue Navigator Complete
Acoustical Panels And Enclosure Systems
Acousti-Curtain/Acoust-Baffles/Acoustic-Lagging
Architectural Acoustical Wall and Ceiling Products
Acousti Foams and Composites Foams and Barriers
Acoustical Wall and Ceiling Foam Products
RFQ's and sales request sales@noisecontrolproducts.com Drawings and Photos engineering@noisecontrolproducts.com 1-888-454-6975 Copyright © 2007 ArtUSA Industries, Inc. All rights reserved.
|