ArtUSA Industries -- Acousti-Wall Installation Guide

ArtUSA -- Noise Control Products, Inc.

Noise Control Products , Inc. -- "The Name To Know In Noise Control"

  Acoustical Steel Panel Enclosures
  Acoustical Curtain Enclosures
  Acoustical Foams & Barriers
  Silencers / Sound Attenuators
  Wall & Ceiling Products
  Sound Measuring Instruments
  Vibration Mounting & Controls
  Air Quality Products
  Acoustical Services
  Industries & Applications
  Noise Control A to Z
  Image Gallery

ArtUSA Acousti-Wall Installation Guide for Noise and Sound Control Panels

ArtUSA Acousti Wall Panels have a lightweight foam core and are simple to install with a wide range of methods. The panels attach in seconds to existing, clean surfaces. Choose from the mounting options below.

Foam Adhesive installation:
	Clean wall surface. Apply 1/4" bead of adhesive around panel perimeter on the fiberglass edge. Apply a 1/4" bead from corner to corner through the center to create an "X." Press panel to surface for 5 seconds Pull the panel away for approximately 1 minute to allow adhesive to become tacky. Firmly press panel back into position. AcouSTIC adhesive (part number PA-02) is a non-toxic, water-based adhesive that cleans up with soap and water. Each 10.5 ounce tube installs approximately 32 square feet of product. Tubes fit standard caulking guns or can be used with ArtUSA’s applicator gun.

Hook & Loop Fastener Installation:
	Prior to shipping, the loop side of the fastener is attached to the panel. The hook side is connected to the loop and has a tape backing. To install, just remove the tape backing and position the panel against the wall.

Concealed Spline Installation:
	Panels come with kerfs along the panel edges and are equipped with a concealed spline attachment. The spline is inserted into one of the panels and installed on the wall. Connecting panels are inserted into the other half of the spline.

Z Clip Installation:
	Before shipment, special Z clips are mounted to the back of the panel. Corresponding wall clips or wall bars are installed on the wall at the appropriate location to allow attachment of the panel.

Return To Top

We manufacture or package, sell, and install - Sound Enclosures - Equipment Enclosures - Personnel Enclosure - Barrier Walls -Thermal Enclosures - Audiometric Testing Rooms - Punch Press Enclosure - Test Cells - Clean Rooms - Diesel Generator & Positive Displacement Enclosures - Fiberglass Enclosure - In-plant Space - Curtain Enclosures - Acoustical Pipe and Duct Lagging - Sanitary Panels and Baffles - Portable Screens - Damping Compound - Industrial Ceiling Baffles - Class 1 Fire Rated Foams - Polyurethane Foams - Fiber-Free - Adhesive Backed - Facings and Barriers - SONEX - Sound Seal - Acoustical Curtains - Acoustical Foam - Rectangular Silencers - Round Silencers - Elbow Silencers - Dust Collectors - Fume Oxidizers - Oil Mist Collectors - Smoke Capture - Work Stations - Isolation Mounts - Pads - Levelers Architectural Noise Control / Noise Abatement - Fabric and Decorative Foam Panels - Baffles - Deflectors - Curtains - Banners Dosimeters - Calibrators - Real Time Analyzers - Software - Active Noise Canceling Muffs - Noiseless Metals

Home I Site Map I About Us I Contact Us

Copyright © 2007 ArtUSA Industries, Inc. All rights reserved.