Applications:

Manufacturing facilities and
industrial assembly areas

Classrooms and music rooms

Machine enclosure lining

Recreational facilities

Multi-purpose rooms

Restaurants and cafeterias

Excellent acoustic control across all frequencies
Subtle surface pattern
Easily mounts to any ceiling and/or wall surface with AcouSTIC™ adhesive
Panel size of 24”x48” in 1-1/2”, 1-7/8” or 2-1/2” thickness

ArtUSA Acousti-Value Line™ Panels provide effective acoustic control at an affordable price. The subtle surface pattern on these panels render them inconspicuous in most settings, making them suitable for a variety of interior settings including: manufacturing facilities, churches, and classrooms. ArtUSA Acousti-Value Line™ Panels are made from willtec® foam, which is Class 1 fire-rated for flame spread and smoke density. Willtec natural also meets the corner burn test UL 1715. ArtUSA Acousti-Value Line™ Panels offer excellent acoustical control across all frequencies with Noise Reduction Coefficients (NRCs) ranging from 0.75 to 1.05. They are especially effective at absorbing excessive sound at the middle frequencies (500 and 1,000 Hz) where unwanted noise and reverberation can interfere with communication. Panels are available in natural or painted willtec and can be easily mounted to any wall or ceiling surface with AcouSTIC™ waterbased adhesive. ArtUSA Acousti-Value Line™ Panels can also be used in conjunction with Acousti-Value Line™ Baffles, which have the same unique surface pattern. Baffles are designed to hang from ceilings in large rooms or open interior spaces.

Make sure both the panels, and the surface to which the panels are being applied, are free of dust and dirt. If adhering to a metal surface, use a de-greaser.
Apply a line of adhesive around the perimeter of the panel approximately 1&#8221 from the edge.
Apply a line of adhesive from opposite corners through the center of the panel, creating an “X&#8221.
Press panel into place and hold for 5 seconds. Then pull panel away to allow adhesive to become tacky. Lastly, press the panel back into position and hold again for 5 seconds.
Press panel into place and hold for 5 seconds. Then pull panel away to allow adhesive to become tacky. Lastly, press the panel
Wear clean cotton/canvas gloves for installation.
Use a sharp razor or fixed-blade knife and a metal straight edge to cut panels. For best results, cut panels on flat side.
Overhead installations may require additional adhesive and mechanical support to ensure a strong enough bond.