Displays, showrooms and museums

Machine rooms or manufacturing areas

Modern offices and building interiors

Recreational facilities

Recording studios and listening rooms

Restaurants and cafeterias

Bold, geometric pattern
Seamless installation with AcouSTIC™ adhesive
Excellent acoustic control
Panel size of 24”x24” in 2”, 3”, 4” or 6” thickness

ArtUSA Acousti-Pyramid™ Panels offer outstanding acoustic control across all frequencies with Noise Reduction Coefficients (NRCs) ranging from 0.75 to 1.05. The unique geometric design of these panels dramatically increases the panels' surface area, providing much more acoustic control than flat surfaces. ArtUSA Acousti-Pyramid Panels are made from ArtUSA Industires’ willtec® foam, which is Class 1 fire-rated according to ASTM E 84 for flame spread and smoke density. Willtec natural also meets the corner burn test UL 1715. ArtUSA Acousti-Pyramid Panels, available in either natural or painted willtec, can be easily mounted to any wall or ceiling surface with AcouSTIC™ water-based adhesive. Once installed, the 2’x2’ panels come together to make an attractive, seamless pattern.

Make sure both the panels, and the surface to which the panels are being applied, are free of dust and dirt. If adhering to a metal surface, use a de-greaser.
Apply a line of adhesive around the perimeter of the panel approximately 1&#8221 from the edge.
Apply a line of adhesive from opposite corners through the center of the panel, creating an “X&#8221.
Press panel into place and hold for 5 seconds. Then pull panel away to allow adhesive to become tacky. Lastly, press the panel back into position and hold again for 5 seconds.
Press panel into place and hold for 5 seconds. Then pull panel away to allow adhesive to become tacky. Lastly, press the panel
Wear clean cotton/canvas gloves for installation.
Use a sharp razor or fixed-blade knife and a metal straight edge to cut panels. For best results, cut panels on flat side.
Overhead installations may require additional adhesive and mechanical support to ensure a strong enough bond.