|
ArtUSA Acousti-Classic™ and
Acousti-Junior™ Panels feature a modified
anechoic wedge design for cost-effective, yet
impressive sound control. The unique geometric shape
of the surface pattern on these panels provides
optimum deflection of sound waves, making them an
excellent choice for recording and broadcast studios.
These versatile panels can also be used in listening
rooms, restaurants, production areas and other
locations where sound absorption is critically
important. Panels offer excellent acoustical control
across all frequencies with Noise Reduction
Coefficients (NRCs) ranging from 0.75 to 0.80.
ArtUSA Acousti-Classic™ and
Acousti-Junior™ Panels are available in
either natural or painted willtec® as well as
colortec™, a process through which the entire
thickness of the foam panel is dyed a deep charcoal
color. These panels are especially appropriate for
rooms with dark décor. Regardless of the finish
option, ArtUSA Industries’ willtec®
foam is Class 1 fire-rated according to ASTM E 84 for
flame spread and smoke density. Willtec natural and
colortec meet the corner burn test UL 1715. These
panels can easily be mounted to any wall or ceiling
surface with AcouSTIC™ water-based
adhesive.
|
 |
 |
 |
|
Fast and easy installation
|
Willtec foam meets
Class 1 fire resistance rating
|
Acoust-Classic panels used
to
reduce noise in recroding studios
|
|
 Make
sure both the panels, and the surface to which the
panels are being applied, are free of dust and dirt.
If adhering to a metal surface, use a de-greaser.
Apply
a line of adhesive around the perimeter of the panel
approximately 1” from the edge.
Apply
a line of adhesive from opposite corners through the
center of the panel, creating an
“X”.
Press
panel into place and hold for 5 seconds. Then pull
panel away to allow adhesive to become tacky. Lastly,
press the panelback into position and hold again for 5
seconds.
Wear
clean cotton/canvas gloves for installation.
Use
a sharp razor or fixed-blade knife and a metal
straight edge to cut panels. For best results, cut
panels on flat side.
Overhead
installations may require additional adhesive and
mechanical support to ensure a strong enough
bond.
|
|
|
Material
|
Open-cell melamine-based
foam
|
|
Density
|
0.5 to 0.7 lbs./cubic Ft. (ASTM
D3574-77)
|
|
Long Term Service
Temperature
|
302 degrees F
|
|
Fire Resistance
|
Class 1 per ASTM E 84 (all
finishes) Meets UL 1715 (willtec natural and
colortec)
|
|
Flame Spread per ASTM E 84
|
Natural: 5 / Painted: 10 /
colortec: 5
|
|
Smoke Density per ASTM E 84
|
Natural: 50 / Painted: 10 /
colortec: 90
|
|
Microbial Growth
|
Passes UL 181, section 11
|
|
Fungus Resistance
|
Rating #0 per ASTM G21
|
|
Finishes
|
Natural (white), Painted or
colortec
|
|
|
| Finish |
Thickness |
|
Coefficients per
ASTM C423-90a |
|
|
125Hz |
250Hz |
500Hz |
1KHz |
2KHz |
4KHz |
NRC |
Mounting Type |
| Natural (White) |
2” |
0.05 |
0.31 |
0.81 |
1.01 |
0.99 |
0.95 |
0.80 |
A |
Painted
{Charcoal, Beige, Brown,
Blue, Light Gray } |
2” |
0.17 |
0.33 |
0.85 |
1.03 |
1.08 |
1.06 |
0.80 |
B |
| colortec™ |
2” |
0.05 |
0.31 |
0.81 |
0.96 |
0.97 |
0.97 |
0.75 |
A |
|
|
|
Recording, broadcast studios and listening
rooms
Machine enclosures and print shops
Indoor firing ranges
Museums or interactive display areas